Seat Exeo 2012 Owner's Manual page 272

270 If and when
Removing the tail light
To change the bulbs you must remove the tail light assem-
bly. Removing the light requires a certain degree of practical
skill.
A special retaining screw is used to secure and guide the tail light.
– Check which of the bulbs is defective.
– Open the tailgate.
– Prise open the cover with the flat side of a screwdriver in the
slot
– Use a screwdriver to loosen the screw
hind the cover.
– Gradually ease the tail light out of the housing
tions
– Remove the bulb holder ⇒ p age 271.
CAUTION
Fig. 206 Luggage com-
partment: Location of the
Take care when removing the tail light to make sure there is no damage to
bolt securing the tail
the paintwork or any of its components.
light unit
Note
Make sure you have a soft cloth ready to place under the glass on the tail
light, to avoid any scratches.
Fig. 207 Removing tail
light from side panel
⇒ f ig. 206
.
1
and ) by pulling alternately in positions
3 4
(arrow) located be-
2
(⇒ f ig. 207 posi-
and .
1 2
