Seat Exeo 2012 Owner's Manual page 123

– Press the knob in again to prevent the setting from being
changed unintentionally.
This button activates or deactivates the daytime running lights function.
With the function activated, when the ignition is switched on the daytime
running lights are turned on automatically.
Note
Please observe any relevant legal requirements which may apply in your
country.
Adaptive headlights* (for driving around bends)
When driving around bends, the headlights will light the
most important areas of the road.
The dynamic cornering light gives better illumination of the curve area and
the side of the road when driving around a bend
Safety First
Fig. 90 Adaptive head-
lights when driving
⇒ f ig.
90. The dynamic cor-
Operating Instructions
nering light is controlled automatically depending on the speed and the
steering wheel angle.
The dipped beam headlights are regulated automatically when you drive
around a bend, depending on how far you turn the steering wheel. The two
main headlights move at different angles to avoid that the front of the vehi-
cle is left completely in the dark.
Note
The system operates from a speed of about 10 km/h.

Hazard warning lights 
The hazard warning lights are used to draw the attention of
other road users to your vehicle in emergencies.
⇒ f ig. 91
– Press the switch 
on or off.
Practical Tips
Lights and visibility
Fig. 91 Centre console:
Switch for hazard warn-
ing lights
to switch the hazard warning lights
Technical Specifications
121

