Seat Exeo 2012 Owner's Manual page 160

158 Air conditioning
Button(s) Meaning
 
(in the centre) Adjusts blower speed

Air to the windows

Air from the dashboard outlets

Air to the footwells
The , and buttons (which regulate air distribution) can either be
  
selected individually or in combination.
Automatic mode
AUTO
Standard setting for all seasons.
Switching on automatic mode
– Select a temperature between +18 °C (64 °F) and +29 °C (86 °F).
⇒ f ig. 130
– Press the
AUTO
The automatic mode maintains a constant temperature inside the vehicle
and dehumidifies the air. Air temperature, air delivery and air distribution
are regulated automatically to reach the desired interior temperature as
quickly as possible, and then to maintain this temperature. The system au-
tomatically compensates for any variations in the outside temperature and
for the effect of direct sunlight.
The automatic temperature regulation only operates at temperature settings
between +18 °C and +29 °C. If a temperature below +18 °C is selected,
appears on the display. If a temperature is selected which is higher than
+29 °C, the display will show
the climate control operates continuously with maximum cooling or heating
button.
HI . In the maximum and minimum settings,
output and the temperature is not regulated automatically. The temperature
is not regulated.
Note
By keeping the button on the driver side pressed for several seconds,
AUTO
the temperature of the passenger side can be set to the temperature of the
driver side or vice versa. The display indicates the new temperature value.
Selecting the temperature

Separate temperatures can be selected for the driver and
front passenger sides.
– Press the or buttons below the displays
- +
desired temperature is selected for the driver side or front pas-
senger side.
The currently selected temperature setting is shown in the display above
the buttons.
By keeping the button on the driver side pressed for several seconds,
AUTO
the temperature of the passenger side can be set to the temperature of the
driver side or vice versa. The display indicates the new temperature value.
The previous temperature setting can be restored by resetting the display
on the driver or passenger side as required.
LO
- +
⇒ f ig. 130
until the

