Seat Exeo 2012 Owner's Manual page 66

64 Cockpit
CHECK button
The button has the following functions:
CHECK
Activating the digital clock and the odometer
When the ignition is switched off, the odometer and the digital clock with
date display can be enabled for a few seconds by pressing the
⇒ f ig.
ton 43.
Starting check procedure (auto-check control)
The auto-check control ⇒ p age 75 checks important components and ve-
hicle systems. These background checks are run constantly, as long as the
ignition is switched on.
You can start the "check procedure" manually by pressing the
with the ignition switched on. This function check can be started with the
engine either stationary or running, but not at road speeds above 5 km/h.
Calling up driver messages
If a Priority 1 symbol flashes in the display ⇒ p age 75, or if the bulb moni-
tor detects a failure of one of the lights ⇒ p age 82, the relevant driver in-
formation can be called up again by briefly pressing the
example:
Switch off engine, check oil level
The message will disappear from the display after about 5 seconds.
Setting the speed warning
You can press the
Setting speed limit warning 1 while the vehicle is moving. Speed limit warn-
ing 2* ⇒ p age 84, Setting speed limit warning 2 can only be set when the
ignition is switched off.
Fig. 43 Detailed view of
the instrument panel:
CHECK button
but-
CHECK
button
CHECK
button to set speed limit warning 1 ⇒ p age 83,
CHECK
button. For
CHECK
