Digital Clock And Date - Seat Exeo 2012 Owner's Manual

Table of Contents

Advertisement

Rev counter
The rev counter indicates the number of engine revolutions
per minute.
You should select a lower gear if the engine speed drops below 1500 rpm.
The start of the red zone on the dial indicates the maximum engine speed
which may be used when the engine is warm and after it has been run in
properly. Before reaching this zone, a higher gear must be selected or your
foot must be removed from the accelerator.
CAUTION
⇒  f ig. 39
The rev counter needle
period, otherwise the engine could be damaged. The start of the red zone
on the dial is different for some engine versions.
For the sake of the environment
Changing up into higher gears sooner following the recommended gear in-
⇒  f ig. 50
dications
will help you to reduce fuel consumption, emissions and
also engine noise.
Safety First
Fig. 39 Detailed view of
the instrument panel:
Rev counter
must only reach the red zone for a short
Operating Instructions

Digital clock and date

Your vehicle is equipped with a quartz clock.
The time and date are set using the
Setting the hour
– Press the
button. The hour display will start to flash.
MODE
– Use the
and
buttons to set the hour.
+
-
Setting the minutes
– Keep pressing the
MODE
es.
– Use the
and
buttons to set the minutes.
+
-
Practical Tips
Cockpit
Fig. 40 Detailed view of
the instrument panel:
Digital clock
and
buttons.
+
-
button until the minutes display flash-
Technical Specifications
61

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents