54
Child safety
Fitting the Top Tether child restraint to the anchoring point
Securing the Top Tether child restraint to the anchoring point
situated on the rear shelf
– Pull out the fastening belt of the child restraint seat according
to the manufacturer's instructions.
– Lead the Top Tether fastening belt under the rear seat head re-
⇒ f ig. 35
straint
(lift the head restraint where necessary).
– Lift the anchorage cover on the rear shelf -see detail-
– Slide the belt so that the Top Tether belt of the child restraint
seat is correctly secured to the rear shelf anchorage.
– Firmly tighten the Top Tether belt following the child restraint
seat manufacturer's instructions.
Releasing the retaining strap
– Release the retainer strap in line with the instructions given by
the child safety seat manufacturer.
– Push the lock and release it from the anchoring support.
Read and bear in mind all the WARNINGS ⇒ p age 53.
Fig. 35 Retainer strap:
correct adjustment and
fitting
⇒ f ig.
35.
WARNING