Interior Lights - Seat Exeo 2012 Owner's Manual

Main beam headlights 
– Press the lever forward to switch on the main beams.
– Pull the lever back towards you to switch the main beam head-
lights off again.
Headlight flasher 
– Pull the lever towards the steering wheel to operate the flasher.
Parking light 
– Switch the ignition off.
– Move the lever up or down to turn on the right or left-hand park-
ing lights respectively.
Notes on these functions
● The turn signals only work when the ignition is switched on. The turn
signal lamp  or  flashes in the instrument panel when the turns signals
⇒ p age 65 are working.
● The turn signals are cancelled automatically when the steering wheel is
returned to the straight-ahead position.
● The main beam headlights can only be switched on if the dipped beam
headlights are already on. The main beam headlight indicator lamp  then
comes on in the instrument panel.
● The headlight flasher comes on for as long as you pull the lever, even if
no other lights are switched on. The main beam headlight indicator lamp 
then comes on in the instrument panel.
● When the parking lights are switched on, the headlight and the tail light
on one side of the vehicle light up with reduced intensity. The parking lights
will only work with the ignition off.
Safety First Operating Instructions
CAUTION
Never use the main beam headlights or the headlight flasher if this would
dazzle oncoming traffic.

Interior lights

Front interior lights and glove compartment light
The front interior light also incorporates the reading lights
for the driver and passenger.
⇒ f ig. 93
The rocker switch
A
lowing functions:
Door light position
– Move switch to the centre position.
A
Practical Tips
Lights and visibility
Fig. 93 Detail of headlin-
er: front interior lights
for the front interior light has the fol-
Technical Specifications
123

