Dodge dakota 2002 Service Manual page 1295

9 - 46 ENGINE - 3.7L
CRANKSHAFT OIL SEAL - REAR (Continued)
(3) Using Special Tool 8506 (Fig. 40), remove the
crankshaft rear oil seal.
Fig. 40 Crankshaft Rear Oil Seal Removal
1 - REAR CRANKSHAFT SEAL
2 - SPECIAL TOOL 8506
INSTALLATION
(1) Lubricate the crankshaft flange with engine oil.
(2) Position the magnetic seal guide Special Tool
8349–2 (Fig. 41) onto the crankshaft rear face. Then
position the crankshaft rear oil seal onto the guide.
Fig. 41 Crankshaft Rear Oil Seal Guide Special Tool
8349–2 and Oil
1 - REAR CRANKSHAFT SEAL
2 - SPECIAL TOOL 8349–2 GUIDE
(3) Using Special Tools 8349 Crankshaft Rear Oil
Seal Installer and C-4171 Driver Handle (Fig. 42),
with a hammer, tap the seal into place. Continue to
tap on the driver handle until the seal installer seats
against the cylinder block crankshaft bore.
Fig. 42 Crankshaft Rear Oil Seal Installation
1 - REAR CRANKSHAFT SEAL
2 - SPECIAL TOOL 8349–1 INSTALLER
3 - SPECIAL TOOL C-4171 HANDLE
(4) Install the flexplate.
(5) Install the transmission.
DR