YASKAWA MOTOMAN DX100 Instruction Manual page 6

Auto-Axcess DI/E Digital
Definition of Terms Used Often in This Manual
• Perform the following inspection procedures prior to conducting
manipulator teaching. If problems are found, repair them
immediately, and be sure that all other necessary processing has
been performed.
– Check for problems in manipulator movement.
– Check for damage to insulation and sheathing of external wires.
• Always return the programming pendant to the hook on the cabinet
of the controller after use.
• The programming pendant can be damaged if it is left in the
manipulator's work area, on the floor, or near fixtures.
• Read and understand the Explanation of Warning Labels in the
DX100 Instructions before operating the manipulator.
The Yaskawa Motoman manipulator is an industrial robot product.
The manipulator usually consists of the controller, the programming
pendant, and supply cables.
In this manual, the equipment is designated as follows:
Equipment
DX100 controller
DX100 programming pendant
Cable between the manipulator and the
controller
vi
CAUTION
Manual Designation
DX100
Programming pendant
Manipulator cable
166465-1CD
166465-1CD
6/56