Introduction; About This Document - YASKAWA MOTOMAN DX100 Instruction Manual

Auto-Axcess DI/E Digital
1

Introduction

1.1






1 Introduction

1.1 About This Document

About This Document
This manual provides information about a Yaskawa Motoman's robotic arc
welding system using the Miller
The use of this manual is for welding personnel who have received
operator training from Yaskawa Motoman, and are familiar with the
operation of their Yaskawa Motoman robot. For more detailed information,
refer to the manuals listed in Section 1.3 "Reference Documentation". This
manual contains the following sections:
CHAPTER 1 - INTRODUCTION
This chapter provides general information about the Auto-Axcess DI/E
Digital power source and its components, technical specifications, a list of
reference documents, and customer service information.
CHAPTER 2 - SAFETY
This chapter describes the conventions used to identify precautionary text
throughout this manual. This chapter also contains a list of general
cautions and warnings that apply to many of the procedures described in
this manual.
CHAPTER 3 - EQUIPMENT DESCRIPTION
This chapter provides instructions for basic setup and integration of a
Yaskawa Motoman welding system with a Auto-Axcess DI/E Digital power
source. This chapter also provides procedures for start-up and calibration.
CHAPTER 4 - THEORY OF OPERATION
This chapter describes general arc welding principles, how the welding
system works, and identifies specific welding problems and requirements.
CHAPTER 5 - OPERATION
This chapter provides instructions for basic operation of the Auto-Axcess
arc welding system. This chapter also provides procedures for start-up.
Sample robot programs are also included here.
CHAPTER 6 - MILLER AUTO-AXCESS E DIGITAL
This chapter provides Miller AUTO-AXCESS E Digital instructions for
macro jobs and error reporting.
1-1
®
Auto-Axcess DI/E Digital power sources.
166465-1CD
166465-1CD
10/56