YASKAWA MOTOMAN DX100 Instruction Manual page 32

Auto-Axcess DI/E Digital
Fig. 3-12: Backup & Load Setting Screen
1
2
3
4
3.5.10.1 To Backup Settings
3.5.10.2 To Load Settings:
3 Equipment Description
3.5 Miller-Motoman Pendant Interface (HMI) Software
5
1. Memory Card Selection: Select when the Backup is to stored on
either a CF or a USB.
2. Save settings from: Select the welder number (#) that will be backed
up or downloaded to.
3. Select the functions that need to be backed up. Only those functions
selected will be backed up.
4. Save settings as: A default file name is created, using the date and
time, that the settings will be backed up to. The file name can be
changed but do not change the extension (.wst).
5. Backup Settings: After selecting the welder #, items to be saved and
file name, this button will save the information on the memory card in
the file named in4..
6. Load Settings from file: Select the configuration file to be loaded into
the welder. This file must be a *.wst file on the memory card.
7. Load settings to: Select the welder # you want the file to be loaded
to.
8. Load Setting: Press this button to load the configuration file to the
selected welder #.
The INI file contains information used by the HMI
NOTE
program. It resides on the programming pendant and
contains data such as the number of welders.
3-14
6
8
9 10
166465-1CD
166465-1CD
7
32/56