166465-1CD
Auto-Axcess DI/E Digital
3
Equipment Description
3.5 Miller-Motoman Pendant Interface (HMI) Software
9. Copy INI to CF/USB: To backup the INI file, insert a memory card and
touch this button. This creates a copy of the INI file on the memory
card.
10. Factory Reset: This resets the INI file to the factory default settings.
In the case of the Ethernet IP interface, pressing the
"Factory Reset" button is your only way of adding or
NOTE
removing welders to the system.
"Factory Reset" button, the next time the system starts
and launches the start-up screen. (See
3-15
When pressing the
Fig. 3-3)
166465-1CD
33/56