Sap-48Gbp - HP HSR6800 Installation Manual

Model
SFP-GE-LH70-SM15
50

SAP-48GBP

CAUTION:
Use transceiver modules provided by HP only. The router might be incompatible with other transceiver
modules and thus displays alarms automatically.
SAP-48GBP front panel
Figure 98 SAP-48GBP front panel
(1) SFP ports 0 to 47
(3) LEDs for SFP ports 0 to 47
(5) Captive screw
SAP-48GBP specifications
Item
Flash
Memory type and size
NVRAM
Fixed Ethernet ports (SFP)
Hot swapping
Central
Connector
wavelength
1550 nm LC
Remarks
4 MB
•
Default—Two 1-GB DDR2 SDRAMs
•
Maximum—Two 2-GB DDR2 SDRAMs
128 KB
48 fiber Ethernet ports
Supporting 100/1000 Mbps autosensing
Supporting the following types of transceiver modules:
•
100 Mbps SFP fiber transceiver modules
•
1000 Mbps SFP fiber transceiver modules
•
100/1000 Mbps SFP fiber transceiver modules
•
SFP-T copper transceiver modules. A fixed Ethernet port supports
10/100/1000 Mbps auto-sensing if used together with this transceiver
module.
Supported
106
Transmission
Optical fiber
rate
9/125 μm
single-mode 1250 Mbps
optical fiber
(2) SAP module status LED (RUN)
(4) Ejector lever
Max.
transmission
distance
70 km
(43.50 miles)