Abnormal Noise (Rattling) Due To Drive Gear Breakage In Delivery Assembly - Canon imageRUNNER ADVANCE C2000 Series Technical Workbook

11) Slightly move the spring [1] on the right door unit in the direction of the blue arrow and remove it from the
shaft. Then attach one each of the two washers (XD1-1108-226/XD1-1108-228) to the shaft and put the
spring back into place.
[Caution] Remove the spring slowly, because the end of the spring is fixed to the right door unit.
12) Reassemble the parts in reverse order from the step 10).
13) Make a double-sided test copy, and check that noise is not caused.
[Additional parts]
XD1-1108-226 WASHER
XD1-1108-228 WASHER
Title

Abnormal noise (rattling) due to drive gear breakage in delivery assembly

Symptom
Abnormal noise (rattling) occurred from the delivery assembly.
Cause
The drive gear [a] of the delivery assembly was broken.
[A] shows the broken gear. [B] shows the gear in normal condition.
pg. 78