Connecting A Pc - ABB ACS880-07 Hardware Manual

Connecting a PC

WARNING! Do not connect the PC directly to the control panel connector of the
control unit as this can cause damage.
Connect a PC to the drive with an USB data cable (USB Type A <-> USB Type Mini-B) as
follows:
1. Lift the USB connector cover on the control panel from bottom upwards.
2. Insert the USB cable Mini-B plug in the control panel USB connector.
3. Insert the USB cable A-plug in the USB connector of the PC (a). -> The panel displays:
USB connected (b).
?
Stop Start
Loc/Rem
1
1
3a
2
Electrical installation 111
3b
USB connected
?
Stop Start
Loc/Rem