Transferring The Memory Unit - ABB ACS880-07 Hardware Manual

174 Maintenance

Transferring the memory unit


WARNING! Obey the instructions in chapter
them, injury or death, or damage to the equipment can occur.
1. Stop the drive and do the steps in section
16 before you start the work.
2. Undo the memory unit mounting screw and take the memory unit out. Replace the unit
in reverse order. Note: For frames R6 to R9, there is a spare screw next to the
memory unit slot.
R6...R9
Safety
Precautions before electrical work
R10, R11
instructions. If you ignore
on page