Block Diagram Of The Brake And Dc Options (+D150, +D151 And +H356) - ABB ACS880-07 Hardware Manual

Block diagram of the brake and DC options (+D150, +D151 and

+H356)
A
T1
1
B
A Drive module cubicle
T1 Drive module
B Brake resistor cubicle
1 Rectifier. Converts alternating current and voltage to direct current and voltage.
2 DC link. DC circuit between rectifier and inverter.
3 Inverter. Converts direct current and voltage to alternating current and voltage.
4 Brake chopper (option +D150). Conducts the surplus energy from the intermediate DC circuit of the
drive to the brake resistor when necessary. The chopper operates when the DC link voltage exceeds a
certain maximum limit. The voltage rise is typically caused by deceleration (braking) of a high inertia
motor. User obtains and installs the brake resistor when needed.
5 Brake resistor (option +D151)
6 Optional DC cable connection busbars (+H356). Not available with option +D150.
Operation principle and hardware description 27
2
4
5
3
6