Woodward 723PLUS Technical Manual page 51

Manual 26482
Step 6:
Minimize the Servlink program (don't close it down). Open Watch Window
software. Go to Start \ Programs \ Woodward \ Watch Window Standard \ Watch
Window Standard, and click on the Watch Window Standard to start the
software.
Step 7:
Click on the "
window, with all of the Service and Configure menu header tabs
Listed below is a description of the icons in the Watch Window software:
Watch Window version 1.05 and above allows for automatic generation of
inspector sheets. Click on the Q icon (Quick Inspector) on the tool bar. A Sheet
will automatically be created form each Service and Configure Header
programmed into the control. Multiple inspectors can be created this way to allow
for viewing more than one sheet at a time.
Woodward
" icon in the Main Window. This will open up a Quick Inspector
723PLUS Digital Marine Control
TABS
41