Regulatory Compliance - Woodward 723PLUS Technical Manual

723PLUS Digital Marine Control

Regulatory Compliance

European Compliance for CE Mark
EMC Directive
This controlling device, manufactured by Woodward, is applied solely as a
component to be incorporated into a larger, prime mover, system. Woodward
declares that this controlling device complies with the EMC Directive
requirements when put into service per the installation and operating instructions
outlined the product manual. All wiring must also follow the wiring and shielding
requirements given in the specific, separate, software manual.
This controlling device is intended to be put into service only upon
incorporation into a prime mover system that itself has met the
requirements of the above Directive and bears the CE mark.
Low Voltage Directive
North American Compliance
UL
EXPLOSION HAZARD—Do not connect or disconnect while circuit is
live unless area is known to be non-hazardous.
Substitution of components may impair suitability for Class I,
Division 2 or Zone 2 applications.
Installation wiring must be in accordance with Class I, Division 2
wiring methods in Article 501–4(b) of the NEC, and in accordance
with the authority having jurisdiction.
All peripheral equipment must be suitable for the location in which
used.
vi
Declared to 2004/108/EC COUNCIL DIRECTIVE of 15
December 2004 on the approximation of the laws of
the Member States relating to electromagnetic
compatibility and all applicable amendments.
Declared to 2006/95/EC COUNCIL DIRECTIVE of 12
December 2006 on the harmonization of the laws of
Member States relating to electrical equipment
designed for use within certain voltage limits.
UL Listed for Class I, Division 2, Groups A, B, C, and
D, T4A at 70 °C ambient for use in the United States
and Canada: UL File E120143.
These listings are limited to those units bearing the UL
or DEMKO agency identifications.
RISQUE D'EXPLOSION—Ne pas raccorder ni débrancher
tant que l'installation est sous tension, sauf en cas
l'ambiance est décidément non dangereuse.
La substitution de composants peut rendre ce matériel
inacceptable pour les emplacements de Classe I, Division 2
ou Zone 2.
Manual 26482
Woodward