Woodward 723PLUS Technical Manual page 113

Manual 26482
G**SPEED REFERENCE**
01 RAISE SPEED LIMIT
02 LOWER SPEED LIMIT
03 IDLE SPEED (RPM)
04 DECEL RAMP (SEC)
05 RAISE SPEED RATE (%/sec)
06 LOWER SPEED RATE (%/sec)
07 SLV-MST RAMP RATE
08 REMOTE REF AT 1 V
08 REMOTE REF AT 5 V
H**START/MAX LIMITS**
01 START FUEL LIMIT
02 START RAMP RATE (%/SEC)
03 MAXIMUM FUEL LIMIT
J**DISCRETE IN**
01 RUN / STOP CONTACT
02 DE-CLUTCH CONTACT
03 MANEUVER MODE
04 CLUTCH ENGAGED
05 CLUTCH REQUEST
06 BALL-HEAD GOVERNOR
07 RESET INPUT CONTACT
08 SERVLINK SELECTED
K**RESPONSE TESTING**
01 ACT BUMP ENABLE
02 ACT BUMP DURATION
03 ACT BUMP LEVEL
04 INITIATE BUMP
L**ACT / TORQUE CALIB*
01 ACT OUT % @ NO LOAD
02 ACT OUT % @ MAX LOAD
03 SCALED ACT COMMAND %
04 TORQUE IN @ NO LOAD
05 TORQUE IN @ MAX LOAD
06 TORQUE IN FILTER (HZ)
07 TORQUE IN PUT %
M**ANALOG IN/OUT CALIB**
01 TACH OUT FILTER (Hz)
02 TACH OUT MIN
03 TACH OUT MAX
04 TACH OUT (4–20 mA)
05 RACK OUT FILTER (Hz)
06 RACK OUT AT MIN
07 RACK OUT AT MAX
08 RACK OUT (4–20 mA)
09 RACK OUT %
10 TORQ INPUT OFFSET
11 TORQ INPUT GAIN
12 TORQUE (4–20 mA)
13 TORQUE OUT FT/LB OFFSET
14 TORQUE OUT FT/LB GAIN
15 TORQUE OUT – FT/LBS
N**COMM /LON PORTS*
01 PORT 2 HARDWARE CFIG
02 PORT 2 BAUD RATE
03 CLON 1 & 2 TIMEOUT
04 CLON CH 1 ACTIVE
05 CLON CH 2 ACTIVE
Woodward
723PLUS Digital Marine Control
Default (Low, High)
*1225 (100, 2200)
*350 (100, 2200)
*350 (100, 2200)
*10.0 (0.0001, 500.0)
*25.0 (1.0, 10000.0)
*25.0 (1.0, 10000.0)
*30.0 (1.0, 500.0)
*350.0 (-32767.0, 32767.0)
*900.0 (-32767.0, 32767.0)
Default (Low, High)
*45.0 (0.0, 100.0)
*6.0 (0.01, 10000.0)
*100.0 (0.0, 101.0)
Display Only
Display Only
Display Only
Display Only
Display Only
Display Only
Display Only
Display Only
Display Only
Display Only
Default (Low, High)
*FALSE
*0.1 (0.01, 2.0)
*1.0 (0.0, 100.0)
*FALSE
Default (Low, High)
*35.0 (-100.0, 110.0)
*100.0 (-10.0, 110.0)
DISPLAY ONLY
*0.0 (-150.0, 150.0)
*100.0 (-150.0, 150.0)
*0.1 (0.010, 10.0)
Display Only
Default (Low, High)
*20.0 (0.1, 20.0)
*0.0 (-30000.0, 30000.0)
*1225.0 (-30000.0, 30000.0)
Display Only
*20.0 (0.1, 20.0)
*0.0 (-30000.0, 30000.0)
*100.0 (-30000.0, 30000.0)
Display Only
Display Only
*0.0 (-5000.0.5000.0)
*1.0 (0.5, 2.0)
Display Only
*0.0 (-200.0, 200.0)
*18093.0 (10000.0, 22000.0)
Display Only
Default (Low, High)
*1 (1, 2)
*9 (1, 10)
*2 (0.0, 30.0)
Display Only
Display Only
103