Woodward 723PLUS Technical Manual page 114

723PLUS Digital Marine Control
P**LOAD CONTROL**
01 CLUTCH SYNC TIME
02 UNLOAD RATE
03 LOAD RATE
04 UNLOAD TRIP POINT
05 CLUTCH IN TIME
06 CLUTCH SPEED WINDOW
07 LOAD SHARE GAIN
08 LOAD SHARE FILTER
09 REF@TRIP LEVEL TIME
R**TORQUE DEVIATION**
01 TORQUE DEV %
02 TORQUE DEV TIME (SEC)
03 LOAD SHARE SETTLE TIME
04 TORQUE DIFFERENTIAL
S**ACT CURRENT DEVIATION**
01 ACT CURRENT DEV %
02 ACT CURR DEV TIME (SEC)
03 LOAD SHARE SETTLE TIME
04 ACT CURRENT DIFFERENTIAL
*ANALOG OUT CALIB*
TACH OUT FILTER (Hz)
TACH OUT MIN
TACH OUT MAX
RACK OUT FILTER (Hz)
RACK OUT AT MIN
RACK OUT AT MAX
TACK OUT (4–20 mA)
RACK OUT (4–20 mA)
*COMM PORT SETUP*
PORT 2 HARDWARE CFIG
PORT 2 BAUD RATE
PORT 3 HARDWARE CFIG
PORT 3 BAUD RATE
PORT 3 STOP BITS
PORT 3 PARITY
PORT 3 TIMEOUT(SEC)
PORT 3 LINK ERROR
PORT 3 EXCEPTION ERR
PORT 3 EX ERR NUM
PORT 3 EX ERR PCT
CLON 1 & 2 TIMEOUT
*LOAD CONTROL*
CLUTCH SYNC TIME
UNLOAD RATE
LOAD RATE
UNLOAD TRIP POINT
CLUTCH IN TIME
CLUTCH SPEED WINDOW
LOAD SHARE GAIN
LOAD SHARE FILTER
REF@TRIP LEVEL TIME
INITIATE BUMP
104
Default (Low, High)
*2.0 (1.0, 120.0)
*20.0 (0.01, 100.0)
*20.0 (0.01, 100.0)
*20.0 (0.0, 100.0)
*5.0 (1.0, 120.0)
*20.0 (0.1, 100.0)
*10.0 (0.01, 10.0)
*0.05 (0.01, 1.0)
*10.0 (0.01, 60.0)
Default (Low, High)
*10.0 (0.1,50.0)
*3.0 (0.01,30.0)
*10.0 (0.01, 30.0)
Display Only
Default (Low, High)
*10.0 (0.1,50.0)
*2.0 (0.01,30.0)
*10.0 (0.01, 30.0)
Display Only
Default (Low, High)
*20.0 (0.1, 20.0)
*0.0 (-30000.0, 30000.0)
*1225.0 (-30000.0, 30000.0)
*20.0 (0.1, 20.0)
*0.0 (-30000.0, 30000.0)
*100.0 (-30000.0, 30000.0)
Display Only
Display Only
Default (Low, High)
*1 (1, 2)
*9 (1, 10)
*3 (1, 3)
*6 (1, 7)
*1 (1, 3)
*1 (1, 3)
*10.0 (0.5, 30.0)
*2.0 (0.0, 30.0)
Default (Low, High)
*2.0 (1.0, 120.0)
*20.0 (0.01, 100.0)
*20.0 (0.01, 100.0)
*20.0 (0.0, 100.0)
*5.0 (1.0, 120.0)
*20.0 (0.1, 100.0)
*10.0 (0.01, 10.0)
*0.05 (0.01, 1.0)
*10.0 (0.01, 60.0)
*FALSE
Manual 26482
Woodward