Removing The Gear Position Sensor (Fjr1300As Only); Removing The Engine (Fjr1300A); Removing The Engine (Fjr1300As); Installing The Engine - Yamaha FJR1300AS(X) Service Manual

ET3P66033
REMOVING THE GEAR POSITION SENSOR
(FJR1300AS only)
1. Disconnect:
• Gear position sensor coupler
2. Remove:
• Gear position sensor
NOTE:
Remove only the screws "1" when removing the
gear position sensor. Do not remove the screws
"2".
2
ET3P61023

REMOVING THE ENGINE (FJR1300A)

1. Loosen:
• Spacer bolt
NOTE:
Loosen the spacer bolt with the pivot shaft
wrench "1" and pivot shaft wrench adapter "2".
Pivot shaft wrench
90890-01471
Frame spanner socket
YM-01471
Pivot shaft wrench adapter
90890-01476
ET3P66034

REMOVING THE ENGINE (FJR1300AS)

1. Loosen:
• Spacer bolt
NOTE:
Loosen the spacer bolt with the pivot shaft
wrench "1" and pivot shaft wrench adapter "2".
1
2
1
2. Remove:
• Engine
NOTE:
Make sure that the engine does not strike the
clutch actuator "1" when removing it.
EAS23720

INSTALLING THE ENGINE

1. Install:
• Engine
NOTE:
When mounting the engine to the frame, be sure
to align the splines on the middle driven shaft
with the splines on the universal joint.
2. Install:
• Spacer bolt "1"
• Engine mounting bolt (rear upper side) "2"
• Spacer "3"
• Engine mounting bolt (rear lower side) "4"
• Engine mounting bolt (left front upper side)
5-8
ENGINE REMOVAL
Pivot shaft wrench
90890-01471
Frame spanner socket
YM-01471
Pivot shaft wrench adapter
90890-01476
1
"5"