Yamaha FJR1300AS(X) Service Manual page 555

Hide thumbs Also See for FJR1300AS(X):
Table of Contents

Advertisement

Fault code No.
12
Diagnostic code No.
Order Item/components and probable
cause
1
Installed condition of crankshaft posi-
tion sensor
2
Connections
• Crankshaft position sensor coupler
• Wire harness ECU coupler
3
Open or short circuit in wire harness.
4
Defective crankshaft position sensor.
Symptom No normal signals are received from the crankshaft posi-
tion sensor.
FUEL INJECTION SYSTEM
Check or maintenance job
Check for looseness or pinching. Cranking the
• Check the coupler for any pins
that may be pulled out.
• Check the locking condition of
the coupler.
• If there is a malfunction, repair it
and connect the coupler se-
curely.
• Repair or replace if there is an
open or short circuit.
• Between the crankshaft position
sensor coupler and ECU cou-
pler.
(gray–gray)
(black/blue–black/blue)
• Replace if defective.
Refer to "CHECKING THE
CRANKSHAFT POSITION
SENSOR" on page 8-248.
8-78
Reinstatement
method
engine.

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Fjr1300a(x)

Table of Contents