Removing The Rear Wheel; Disassembling The Rear Wheel - Yamaha FJR1300AS(X) Service Manual

EAS22050

REMOVING THE REAR WHEEL

ECA3P6D013
CAUTION:
Keep magnets (including magnetic pick-up
tools, magnetic screwdrivers, etc.) away
from the rear wheel hub "1", otherwise the
wheel sensor rotor equipped in the wheel
hub may be damaged, resulting in improper
performance of the ABS system.
1
1. Stand the vehicle on a level surface.
EWA13120
WARNING
Securely support the vehicle so that there is
no danger of it falling over.
NOTE:
Place the vehicle on the centerstand so that the
rear wheel is elevated.
2. Remove:
• Rear wheel sensor
• Rear wheel axle nut
• Brake torque rod
• Rear wheel axle
• Rear brake caliper
• Rear wheel
• Rear wheel sensor housing
ECA3P6D016
CAUTION:
• Do not operate the brake pedal when re-
moving the brake caliper.
• Be sure to remove the rear wheel sensor
before removing the rear wheel sensor
housing, otherwise the sensor could be
damaged.
NOTE:
Move the rear wheel to the right to separate it
from the final drive assembly.
ET3P6D002

DISASSEMBLING THE REAR WHEEL

ECA3P6D003
CAUTION:
• Keep magnets (including magnetic pick-up
tools, magnetic screwdrivers, etc.) away
from the wheel sensor rotor.
• Do not drop the wheel sensor rotor or sub-
ject it to shocks.
• If any solvent gets on the wheel sensor ro-
tor, wipe it off immediately.
1. Remove:
• Oil seals
• Bearing retainer
• Wheel bearings
M MMM M MMM M M MMM
a. Clean the surface of the front wheel hub.
b. Remove the oil seals "1" with a flathead
screwdriver.
NOTE:
To prevent damaging the wheel or wheel sensor
rotor, place a rag "2" between the screwdriver
and the surface of the wheel or rotor.
c. Loosen the bearing retainer "1" with a hexa-
gon wrench (41) "2".
Hexagon wrench (41)
90890-01525
YM-01525
ECA3P6D007
CAUTION:
The bearing retainer has left-handed
threads. To loosen the retainer, turn it clock-
wise.
4-27
REAR WHEEL
M M MMM M M MMM M M MMM M MMM