Yamaha FJR1300AS(X) Service Manual page 623

EW3P61011
WARNING
When maintenance or checks have been performed on components related to the ABS, be sure
to perform a final check before delivering the vehicle to the customer. (Refer to "[D-3] FINAL
CHECK" on page 8-180.)
EAS27830
[A] CHECKING THE ABS WARNING LIGHT
Turn the main switch to "ON". (Do not start the engine.)
1. The ABS warning light does not come on. [B-1]
2. The ABS warning light flashes. [B-2]
3. The ABS warning light remains on. [B-3]
4. The ABS warning light comes on for 2 seconds, then goes off. [B-4]
ET3P6D006
[B-1] THE ABS WARNING LIGHT FAILS TO COME ON
1. Only the ABS warning light fails to come on when the main switch is turned to "ON". [C-1]
2. The ABS warning light and all other indicator lights fail to come on. [C-2]
ET3P6D008
[B-2] THE ABS WARNING LIGHT FLASHES
1. Test coupler adapter
• Check if the test coupler adapter is connected to the ABS test coupler.
• If the test coupler adapter is connected, disconnect it, and then install the protective cap onto the
ABS test coupler.
• If the test coupler adapter is not connected, refer to "[B-5] MALFUNCTION ARE CURRENTLY DE-
TECTED" on page 8-147.
ET3P6D007
[B-3] THE ABS WARNING LIGHT REMAINS ON
1. A malfunction is detected. [B-6]
ET3P6D010
[B-4] THE ABS WARNING LIGHT COMES ON FOR 2 SECONDS, THEN GOES OFF
Remove front cowling right inner panel 1 to access the ABS test coupler "1". Remove the protective cap
from the ABS test coupler, and then connect the test coupler adapter "2" to the coupler. The T/C termi-
nal (sky blue) is now grounded.
ABS (ANTI-LOCK BRAKE SYSTEM)
1
8-146