Removing The Front Fork Legs; Disassembling The Front Fork Legs - Yamaha FJR1300AS(X) Service Manual

Hide thumbs Also See for FJR1300AS(X):

Table of Contents

REMOVING THE FRONT FORK LEGS

The following procedure applies to both of the

front fork legs.

1. Stand the vehicle on a level surface.

Securely support the vehicle so that there is

no danger of it falling over.

Place the vehicle on a suitable stand so that the

front wheel is elevated.

• Upper bracket pinch bolt "1"

• Cap bolt "2"

• Lower bracket pinch bolts "3"

Before loosening the upper and lower brack-

et pinch bolts, support the front fork leg.

The following procedure applies to both of the

front fork legs.

1. Hold the nut "1" and loosen the cap bolt "2".

Stroke the inner tube several times while drain-

ing the fork oil.

• Dust seal "1"

• Oil seal clip "2"

(with a flat-head screwdriver)

Do not scratch the inner tube.

• Do not remove the fork leg protector from the

• If the front fork leg protector must be removed,

always install a new one.

Table of Contents