Removing The Crankshaft Position Sensor; Installing The Crankshaft Position Sensor - Yamaha YZF-R1 2007 Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
EAS24530
REMOVING THE CRANKSHAFT POSITION
SENSOR
1. Disconnect:
• Crankshaft position sensor lead coupler
2. Remove:
• Crankshaft position sensor
• O-ring
• Pickup coil rotor cover "1"
NOTE:
Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern.
After all of the bolts are fully loosened, remove
them.
EAS24540
INSTALLING THE CRANKSHAFT POSITION
SENSOR
1. Install:
• Gasket New
• Pickup rotor cover "1"
Pickup rotor cover
12 Nm (1.2 m·kg, 8.7 ft·lb)
• O-ring New
• Crankshaft position sensor
Crankshaft position sensor bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)
LOCTITE®
2. Connect
email: info@motomatrix.co.uk
CRANKSHAFT POSITION SENSOR
• Crankshaft position sensor lead coupler
5-38