Yamaha FJR1300AS(X) Service Manual page 635

Fault code No. AbS_16
Order Item/components and probable
cause
2 Wire harness continuity.
ABS (ANTI-LOCK BRAKE SYSTEM)
Symptom No continuity in the rear wheel sensor circuit.
Check or maintenance job
• Check for continuity between
the gray terminal "1" and the
gray terminal "3" and between
the white terminal "2" and the
white terminal "4".
• If there is no continuity, the wire
harness is defective. Properly
repair or replace the wire har-
ness.
• Check that there is no continuity
between the ground and the
gray terminal "1" or gray termi-
nal "3" and between the ground
and the white terminal "2" or
white terminal "4".
• If there is continuity, the wire
harness is defective. Properly
repair or replace the wire har-
ness.
• Check that there is no continuity
between the gray terminal "1"
and the white terminal "2" and
between the gray terminal "3"
and the white terminal "4".
• If there is continuity, the wire
harness is defective. Properly
repair or replace the wire har-
ness.
5. ABS ECU
6. Rear wheel sensor
8-158
2
1
B/W W B Br/B L/W W/Y
R
L/B B/W Gy W G/R
B/G R/L
L/R Y/G W/L G/Y Sb Br/W
Reinstatement
confirmation
method
3 4
Gy W W Gy
5 6