Yamaha FJR1300AS(X) Service Manual page 302

Fork seal driver weight
90890-01184
Replacement hammer
YM-A9409-7
Oil seal installing tool
90890-01512
YM-01512
Installed depth "a"
8.5–10.0 mm (0.33–0.39 in)
3
6. Install:
• Universal joint
• Final drive assembly
NOTE:
Align the drive shaft splines with the driven yoke
of the universal joint.
7. Tighten:
• Final drive assembly nuts
Final gear case nut
42 Nm (4.2 m·kg, 30 ft·lb)
8. Install:
• Sidestand
• Left footrest assembly
Refer to "SHIFT ACTUATOR AND SHIFT
ROD (FJR1300AS only)" on page 5-69.
9. Install:
• Rear wheel
Refer to "REAR WHEEL" on page 4-25.
1
4
2
a
4-115
10.Fill:
• Final gear case
Refer to "CHECKING THE FINAL GEAR OIL
LEVEL" on page 3-33.
SHAFT DRIVE