Feeding The Document; Loading The Document Into The Adf - Konica Minolta bizhub C451 Copy Operations

4
4.3

Feeding the document

The document can be fed in either of the following two ways. Be sure to position the document correctly
according to the type of document being copied.
Document Feed Method
Using the ADF
Using the original glass

Loading the document into the ADF

0 Do not load documents that are bound together, for example, with paper clips or staples.
0 For details on the types of documents that can be loaded into the ADF, refer to "Original documents"
on page 8-23.
0 Do not load more than 100 sheets or so many sheets that the top of the stack is higher than the t mark,
otherwise a document misfeed or damage to the document or machine may occur. However, a
document that exceeds 100 pages can be scanned in separate batches. For details, refer to "Scanning
the document in separate batches ("Separate Scan" setting)" on page 4-11.
0 If the document is not loaded correctly, it may not be fed in straight or a document misfeed or damage
to the document may occur.
0 If the document is loaded in any orientation other than with the top of the document toward the back
of the machine, be sure to select the document orientation. For details on selecting the document
orientation, refer to "Selecting the document orientation ("Original Direction" settings)" on page 4-23.
1
Slide the lateral guides to fit the size of the document.
2
Load the document face up in the document feed tray.
– Load the document pages so that the top of the document
is toward the back or the left side of the machine.
4-8
Features
By using the ADF, a multi-page document can be fed automatically, one page at a
time. This feed method can also be used to automatically scan double-sided doc-
uments.
Place the document directly on the original glass so that it can be scanned. This
method is best with books and other documents that cannot be fed through the
ADF.
Basic copy operations
bizhub C451/C550/C650