Messages Regarding Printing Or Adjustment; Cannot Execute This Command. Use Other Paper; Cannot Calibrate; Excessive Temperature Or Humidity - Canon ipf8300 User Manual

Messages regarding printing or adjustment

Cannot execute this command. Use other paper. ......................................................................................... 1097

Cannot calibrate. ........................................................................................................................................... 1097

Excessive temperature or humidity. .............................................................................................................. 1097

Borderless printng not possible. Paper stretched or shrank. ......................................................................... 1098
Before borderless printing, move the blue platen switch. .............................................................................. 1098
Blue platen switch is dirty. ............................................................................................................................. 1098
Move the blue platen switch No.xx to the right. (xx represents a number) .................................................... 1098
Cannot adjust paper feed. ............................................................................................................................. 1098
Check printed document. ............................................................................................................................... 1099
Cannot execute this command. Use other paper.
Cause
Paper compatible
with color calibra-
tion is not loaded.
Cannot calibrate.
The paper for printing a test pattern is soiled.
Otherwise, you have loaded colored paper.
The test pattern was printed too faintly.
Direct sunlight or strong lighting may be shin-
ing on the printer and causing the sensor to
malfunction.
Excessive temperature or humidity.
Cause
The temperature or humidity where
the printer is installed is out of the
acceptable range for operation.
iPF8300
Downloaded from ManualsPrinter.com Manuals
1. Press the OK button to clear the error.
2. Load paper that is compatible with color calibration.
See the Paper Reference Guide.
(See "Types of Paper.")
Always make sure the loaded paper matches the type of paper in the printer paper settings. Ad-
justment cannot be completed correctly unless the loaded paper matches the settings.
Cause
Press the OK button to clear the error.
Load unused paper compatible with color calibration.
Press the OK button to clear the error.
Take steps to remedy faint printing.
Press the OK button to clear the error.
Take steps to ensure the printer is not used when exposed to direct
sunlight or strong lighting.
Press ▲ or ▼ to select Stop, and then press the OK button to stop printing.
Use the printer under suitable environmental conditions. Also note that various
environmental conditions are recommended for various types of paper. For de-
tails on the recommended environmental conditions, see the Paper Reference
Guide.
Error Message > Messages regarding printing or adjustment
Corrective Action
→P.768
Corrective Action
(See "Types of Paper.")
→P.768
(See "Printing is faint.")
→P.1057
Corrective Action
Cannot execute this command. Use other paper.
>
13
1097