Main Screen; Port Switching; Input Port Selection - ATEN VM3404H User Manual

Main Screen

The Main Screen shows the Input ports in the top row, which are tied to the
Output ports shown in sequential order (1–9) or (1–4) at the bottom row.
INPUT
OUTPUT
 The front panel pushbutton label (1–9) or (1–4) corresponds to the Input
ports and Output ports on the unit's rear panel.
 Use the Menu pushbutton to view the LCD Menu (see LCD Menu
Organization, page 23).
 Use the Profile pushbutton to switch between profile connections (see
Profile List, page 41).

Port Switching

From the Main Screen, users can configure the Input-to-Output port
connections to associate an Input source device to an Output display.

Input Port Selection

Use the Input Port pushbuttons to select the Input port you want to configure.
INPUT
OUTPUT
To select which input source displays on each output port, do the following:
1. Press any Input port pushbutton (1–9). The Output port LED(s) tied to the
said Input port flash.
In the example below, pressing Input port 1 shows it is tied to Output ports
1 and 2.
1 2 3 4
1 2 3 4
P1
1 2 3 4
1 2 3 4
Chapter 3. Front Panel Configuration
19