Daikin RTSQ20PY1 Service Manual page 202

Field Setting
<Disable-operation setting of the outdoor unit> (Applied model: RTSYQ20P)
Make disable-operation setting by each outdoor unit.
Make the following setting with the master unit. (Setting with the slave unit will be invalidated.)
* Discriminate between the master unit and the slave unit according to LED displays shown
k To prohibit the operation of master unit:
Set the setting item No. 38 of "Setting mode 2" to "Master operation prohibited".
k To prohibit the operation of slave unit:
Set the setting item No. 39 of "Setting mode 2" to "Slave operation prohibited".
• Systems with multi outdoor units cannot be set to "operation prohibited" by compressor.
• If systems with multi outdoor units are set to "operation prohibited" as aforementioned,
<Setting of Function Unit to "Operation Prohibited> (Applied model: RTSYQ10~20P)
Set the setting item No. 42 of "Setting mode 2" to "INV compressor operation prohibited".
Make the following setting with the function unit.
191
below.
LED display (
H1P-----------H7P
h h k h h h h
Master :
h h h h h h h
Slave :
(Step)
(1) Press and hold the MODE button (BS1)
for a period of 5 sec. or more.
(2) Press the SET button (BS2) 38 times.
(3) Press the RETURN button (BS3) once.
(4) Press the SET button (BS2) once.
(5) Press the RETURN button (BS3) twice.
(6) Press the MODE button (BS2) once.
(Step)
(1) Press and hold the MODE button (BS1)
for a period of 5 sec. or more.
(2) Press the SET button (BS2) 39 times.
(3) Press the RETURN button (BS3) once.
(4) Press the SET button (BS2) once.
(5) Press the RETURN button (BS3) twice.
(6) Press the MODE button (BS2) once.
outdoor unit rotation will not be conducted.
(Step)
(1) Press and hold the MODE button (BS1)
for a period of 5 sec. or more.
(2) Press the SET button (BS2) 42 times.
(3) Press the RETURN button (BS3) once.
(4) Press the SET button (BS2) once.
(5) Press the RETURN button (BS3) twice.
(6) Press the MODE button (BS2) once.
k h l
: ON : OFF : Blink)
H8P
k
l
(Factory setting)
LED display (
H1P-----------H7P
k h h h h h h
k k h h k k h
k h h h h h l
k h h h h l h
k h h h h h h
h h k h h h h
LED display (
H1P-----------H7P
k h h h h h h
k k h h k k k
k h h h h h l (Factory setting)
k h h h h l h
k h h h h h h
h h k h h h h
LED display (
H1P-----------H7P
k h h h h h h
k k h k h k h
k h h h h h l (Factory setting)
k h h h h l h
k h h h h h h
h h k h h h h
SiBE31-801_C
k h l
: ON : OFF : Blink)
(Factory setting)
k h l
: ON : OFF : Blink)
k h l
: ON : OFF : Blink)
Test Operation