Daikin RTSQ20PY1 Service Manual page 413

SiBE31-801_C
Building Management System
No. Part name
1 Basic
1-1
intelligent Touch
Controller
1-2
Option
1-3
1-4 El. compo. box with earth terminal (4 blocks)
2 Basic
intelligent
Manager III
2-1
2-2 Option
2-3
2-4 Optional DIII Ai unit
2-5 Di unit
2-6 Dio unit
3 *1 Interface for use in BACnet
3-1 Optional DIII board
3-2 Optional Di board
4 *2 Interface for use in LONWORKS
Parallel interface
5
Basic unit
[
Temperature
6
measurement units
Temperature
7
setting units
8 Unification adaptor for computerized control
Notes:
★
1. BACnet
★
2. LONWORKS
★
3. Installation box for
Appendix
intelligent Touch
Hardware
Controller
Hardware DIII-NET plus adaptor
P. P. D.
Software
Web
128 units
256 units
Number of
Hardware units to be 512 units
connected
768 units
1024 units
P.P.D.
Software Web
Eco
®
®
®
is a registered trademark of American Society of Heating, Refrigerating and Air-
Conditioning Engineers (ASHRAE).
®
‚ is a registered trade mark of Echelon Corporation.
adaptor must be procured on site.
Model No.
• Air-Conditioning management system that can be controlled by a
DCS601C51
compact all-in-one unit.
DCS601A52 • Additional 64 groups (10 outdoor units) is possible.
DCS002C51 • P. P. D.: Power Proportional Distribution function
• Monitors and controls the air conditioning system using the Internet
DCS004A51
and a Web browser application on a PC.
KJB411A • Wall embedded switch box.
DAM602B52
DAM602B51
• Air conditioner management system that can be controlled by
DAM602B51×2
personal computers.
DAM602B51×3
DAM602B51×4
DAM002A51 • Power Proportional Distribution function
• Monitors and controls the air conditioning system using the Internet
DAM004A51
and a Web browser application on a PC.
DAM003A51 • ECO (Energy saving functions.)
DAM101A51 • External temperature sensor for intelligent Manager III.
DEC101A51 • 8 pairs based on a pair of On/Off input and abnormality input.
DEC102A51 • 4 pairs based on a pair of On/Off input and abnormality input.
• Interface unit to allow communications between VRV and BMS.
DMS502B51 Operation and monitoring of air-conditioning systems through
®
BACnet communication.
• Expansion kit, installed on DMS502B51, to provide 2 more DIII-NET
DAM411B51
communication ports. Not usable independently.
• Expansion kit, installed on DMS502B51, to provide 16 more
DAM412B51
wattmeter pulse input points. Not usable independently.
• Interface unit to allow communications between VRV and BMS.
DMS504B51 Operation and monitoring of air-conditioning systems through
®
LONWORKS
• Enables ON/OFF command, operation and display of malfunction;
DPF201A51
can be used in combination with up to 4 units.
DPF201A52 • Enables temperature measurement output for 4 groups; 0-5VDC.
DPF201A53 • Enables temperature setting input for 16 groups; 0-5VDC.
• Interface between the central monitoring board and central control
★ DCS302A52
units.
Function
communication.
Option List
402