Front Panel - Promise Technology VSky A1100 Product Manual

Introduction

Front Panel

Front view of VSky A1100bSM
SSD Access LED
Feature
Gigabit LAN LEDs
Message LED
SSD Access LED
Power button/LED
Locate LED
Default setting button
SDD disk drive carriers
1G LAN LEDs
Message LED
Description
Lights when a valid link is established on the corresponding Gigabit LAN port
(from left to right, ports 4-1), blinks when there is activity on the port. Normally
only one LAN port (eth0) is used.
Indicates a hardware event.
Lights when there is read/write activity on the SSDs.
Press this to power on the system. This lights when the system is powered on.
Normally dark. Lights when the location feature is triggered.
Press to return system configuration to default settings.
Two SSD drives are installed. Each drive carrier has a Status LED (uppermost)
and Activity LED (lowermost) on the right front side.
SSD disk carriers
3
Promise Technology, Inc.
VGA port
USB ports
2 x USB 3.0
Default setting button
Locate LED
Power button/LED