Promise Technology VSky A1100 Product Manual page 27

VSky A1100 Product Manual
2. Configure network settings, first for the Public network.
• IP address
• Netmask
• Gateway IP address
• DNS server IP address
Please enter a new public IP (e.g., 10.0.0.10) or accept the
current public ip: 10.10.0.100 and press Enter: xxx.xxx.xxx.xxx
Please enter a new netmask of the public network or accept the
default: 255.255.255.0 and press Enter: xxx.xxx.xxx.xxx
Please enter a gateway ip of the public network or leave blank
and press Enter: xxx.xxx.xxx.xxx
Please enter a dns ip of the public network or leave blank and
press Enter: xxx.xxx.xxx.xxx
Important
The Gateway and DNS IP settings for the Public Network are needed for some important functions
and services, including NTP service, which is required for S3, ACL and AD/LDAP functions.
3. Then configure the network settings for the Cluster (private) network.
• IP address
• Netmask
Please enter a cluster (private) IP (e.g., 10.10.10.10) or
accept the current cluster (private) IP: 10.10.10.100 and press
Enter: xxx.xxx.xxx.xxx
Please enter a new netmask of the cluster (private) network or
accept the default: 255.255.255.0 and press Enter:xxx.xxx.xxx.
xxx
Please enter an ntp server ip address or leave blank and press Enter:
xxx.xxx.xxx.xxx
22
Promise Technology, Inc.