C Reate S Erver C Luster - Promise Technology VSky A1100 Product Manual

Initial Setup
c S
reate erver
Now create the cluster, starting with the first cluster node. To setup the first node in the cluster:
1. Return to the Main Menu, and choose Node Management.
2. Select Choose Network Interface.
3. Now assign first the Public interface, Bond0; then assign the Cluster interface, Bond1.
4. Select Choose Storage Volumes and select the volume you created previously.
5. Select Create a New Cluster. Later you will add another node or nodes to this cluster.
6. Finally, choose Enable Gateway Function on the Node. This completes the setup for the first node.
Join Cluster
Now join remaining nodes to the cluster. To do this, simply repeat steps 1 through 4 for each node. Then:
7. Select Join Cluster and add the node to the cluster you just setup.
8. Finally, choose Enable Gateway Function on the Node. When all the nodes have completed this
configuration, the cluster is ready to begin operation.
c
lUSter
43
Promise Technology, Inc.