Table of Contents
Advertisement
VSky A1100 Product Manual
S
etUp USing text menU
Use the procedure described in the remaining sections of this chapter to use the Text Menu to perform basic
setup for network configuration settings, storage volumes (using CLI menu), and creating the cluster. When you
complete these tasks, you must then use the web GUI menus to setup virtual storage (described in previous
sections of this chapter).
Using the text menu
To navigate the text menu interface, use the up and down arrow keys to move the selector highlight, and press
the <Enter> or <F12> to choose the highlighted option.
When there is a choice of actions offered in the menu, use <Tab> and <Alt-Tab>; or the arrow keys to move
the highlight between the options. For example, several menus offer the options <OK> or <Cancel> to complete
or cancel an action.
Use <Space> to select an element in the menu. For example, the ports are listed for selection as:
(
)
eth0
(
)
eth1
(
)
eth3
(
)
eth4
Move the highlight to the listed port and press <Space> to select it. An asterisk ( * ) appears to indicate the port
has been selected.
Also note that reminders appear at the bottom of the menu screen, as follows:
<Tab>/<Alt-Tab> between elements | <Space> selects | <F2> next screen
...etc.
34
Promise Technology, Inc.
Advertisement
Table of Contents
