Cli Cluster Wizard - Promise Technology VSky A1100 Product Manual

Initial Setup

CLI Cluster Wizard

To launch the CLI Cluster Wizard, type the command: cluster_wizard
The wizard begins immediately. In the CLI interface, you are asked a series of questions, each question requires
a response. If you press the Enter key as the response for any of the question prompts, the current value or
default value for the parameter is set.
In the CLI Cluster Wizard, port bonding is configured automatically. However you can change the port bonding
protocol used for Public and Cluster (private) networks using the Text Mode menu. See the Product Manual for
more information about setting up the cluster with the Text Mode menu.
Use the examples given here as a guide. Note that "xxx.xxx.xxx.xxx" in the examples represent user input for
IP settings.
1. Enter a host name for the VSky A-Series node.
root@0vq9:~# cluster_wizard
Running cluster wizard...
Please enter a new hostname (e.g.,
hostname01) or accept the current
hostname: 0vq9 and press Enter.
21
Promise Technology, Inc.