M Anaging With The Cli; Making A Serial Connection - Promise Technology VTrak D5000 Series Product Manual

Promise Technology
M
anagIng wItH tHe

Making a Serial Connection

Before you begin, be sure the RJ11-to-DB9 serial data cable is connected between the Host PC and the VTrak
D5000 enclosure, and that both machines are booted and running.
Serial port on the VTrak D5000 controller
Then do the following actions:
1. Change your terminal emulation program settings to match the following specifications:
• Bits per second: 115200
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: none
2. Start your PC's terminal VT100 or ANSI emulation program.
3. Press Enter once to launch the CLI.
clI
136
VTrak D5000 Series Product Manual