Ricoh D131 Service Manual page 966

Code
14-08 Data Send to SMTP Server
Failed (5XX)
14-09 Authorization Failed for
Sending to SMTP Server
14-10 Addresses Exceeded
14-11 Buffer Full
14-12 Data Size Too Large
14-13 Send Cancelled
14-14 Security Locked File Error
14-15 Mail Data Error
14-16 Maximum Division Number
Error
D619
Meaning Suggested Cause/Action

Failed to access the SMTP server because
the transmission failed.

SMTP server operating incorrectly

Destination folder setting incorrect.

Direct SMTP sending not operating
correctly.

Software application error.

POP-Before-SMTP or SMTP authorization
failed.

Incorrect setting for file transfer

Number of broadcast addresses exceeded
the limit for the SMTP server.

The send buffer is full so the transmission
could not be completed. Buffer is full due
to using Scan-to-Email while the buffer is
being used send mail at the same time.

Transmission was cancelled because the
detected size of the file was too large.

Processing is interrupted because the user
pressed Stop.

Update the software because of the
defective software.

The transmitting a mail is interrupted via
DCS due to the incorrect data.

Update the software because of the
defective software.

When a mail is divided for the mail
transmission and the division number of a
mail are more than the specified number,
the mail transmission is interrupted.

Update the software because of the
defective software.
74 SM