Reinstallation; Pressure Roller Cleaning Unit - Ricoh D131 Service Manual

Fusing Unit

Reinstallation


Make sure that the harness of the web driver motor is not pinched by the fusing inner cover

4.9.5 PRESSURE ROLLER CLEANING UNIT

Remove:

Fusing unit p.4-70
1. Cover [A] ( x 1)
2. Cleaning roller [B] (
3. Cleaning roller [C] (
Reinstallation

When attaching the lower cover of the pressure roller cleaning roller, make sure that the tab
[D] engages with the groove [E].

If the bushings are noisy after replacement, lubricate them on both ends and the holes where
the bushings are attached with Barrierta Grease L553R.
D131/D132/D133
x 2)
x 1)
4-76 SM