Ricoh D131 Service Manual page 735

SP5000 Mode: SP5821 to SP5990
SDK Application Counter DFU
5893
Displays the counter name of each SDK application.
1 SDK-1
2 SDK-2
3 SDK-3
4 SDK-4
5 SDK-5
6 SDK-6
External Charge Unit Setting Switch Charge Mode
5894
[0 to 2/0/1]
PM Double Count
This SP sets the PM counter to count double for paper longer than 420 mm.
[0 to 1/0/1]
5899
0: OFF
1: PM registers a double-count for paper longer than 420 mm in the sub scan
direction.
Plug & Play Maker/Model Name
Selects the brand name and the production name for Windows Plug & Play.
This information is stored in the NVRAM. If the NVRAM is defective, these
5907
names should be registered again.
After selecting, press the "Original Type" key and "#" key at the same time.
When the setting is completed, the beeper sounds five times.
D131/D132/D133 3-160 SM Appendix