Ricoh D131 Service Manual page 1032

Hang-up decision when a negative
code (RTN or PIN) is received
3
during G3 immediate transmission
0: No hang-up, 1: Hang-up
4-7 Not used
No Function
Maximum number of page
0-7 retransmissions in a G3
memory transmission
Communication Switch 04 - Not used (do not change the settings)
Communication Switch 05 - Not used (do not change the settings)
Communication Switch 06 - Not used (do not change the settings)
Communication Switch 07 - Not used (do not change the settings)
Communication Switch 08 - Not used (do not change the settings)
Communication Switch 09 - Not used (do not change the settings)
No Function
Point of resumption of memory
transmission upon redialing
0
0: From the error page
1: From page 1
1-7 Not used
D619
Communication Switch 03 (SP No. 1-104-004)
00 - FF (Hex) times.
This setting is not used if ECM is switched on.
Default setting - 03(H)
Communication Switch 0A (SP No. 1-104-011)
0: The next page will be sent even if RTN
or PIN is received.
1: The machine will send DCN and hang up
if it receives RTN or PIN.
This bit is ignored for memory
transmissions or if ECM is being used.
Do not change the settings.
Comments
Comments
0: The transmission begins from the page
where transmission failed the previous time.
1: Transmission begins from the first page,
using normal memory transmission.
Do not change the settings.
140 SM