Merging Applications - Ricoh D131 Service Manual

The data necessary for authentication is transferred with the application program to the
target SD card.
Do not use an SD card if it was used with a computer before this time. Correct operation
is not guaranteed if this type of SD card is used.
The SD card is the only evidence that the customer is licensed to use the application
program. Also, the service technician may occasionally need to check the SD card and its
data to solve problems. For these reasons SD cards must be stored with the machine.
After an SD card has been used to move other applications onto that card, that SD card
cannot be used for a different function.
Never remove the System SD Card from Slot 1
Before uploading to an SD card, always make sure that the write-protect switch is OFF. (It
is very easy to accidentally turn on the write-protect switch when inserting or removing an
SD card.)

Merging Applications

Do this procedure to put more than one application on one SD card.
1. Turn off the main machine.
2. Remove the SD card slot cover (
3. Put the Source SD card in Slot 2 (service slot). This card contains the application that you
want to copy.
The PS3 SD card cannot be the source card (it cannot be copied).
4. Check the target SD card and confirm that its write-protect switch is OFF.
5. Insert the Target SD card into the SD card Slot 1.
6. Open the front door.
7. Turn the main machine on.
8. Do SP5873 001.
9. Touch "Execute".
10. Follow the instructions on the display and touch "Execute" to start copying.
11. When the display tells you copying is completed, touch "Exit".
12. Turn the main machine off.
13. Remove the Source SD card from Slot 2. Leave the target SD card in Slot 1.
14. Turn the main machine on.
15. Go into the User Tools mode and check that all the applications on the SD card in Slot 1 are
enabled:
User Tools> System Settings> Administrator Tools> Firmware Version
1. Turn the main machine off again.
SM
x 1).
2-101
MFP Options
D131/D132/D133