Ricoh D131 Service Manual page 1077

Address
680583
To Not used
6805A0
Acceptable CED detection
6805A1
frequency upper limit (high byte)
Acceptable CED detection
6805A2
frequency upper limit (low byte)
Acceptable CED detection
6805A3
frequency lower limit (high byte)
Acceptable CED detection
6805A4
frequency lower limit (low byte)
6805A5 CED detection time
Acceptable CNG detection
6805A6
frequency upper limit (high byte)
Acceptable CNG detection
6805A7
frequency upper limit (low byte)
Acceptable CNG detection
6805A8
frequency lower limit (high byte)
Acceptable CNG detection
6805A9
frequency lower limit (low byte)
6805AA Not used
6805AB CNG on time
6805AC CNG off time
Number of CNG cycles required
6805AD
for detection
SM
Function
185
Unit
Do not change the
-
settings.
If both addresses
BCD (Hz) contain FF(H), tone
detection is disabled.
If both addresses
BCD (Hz) contain FF(H), tone
detection is disabled.
20 ms ± 20
Factory setting: 200 ms
ms
If both addresses
BCD (Hz) contain FF(H), tone
detection is disabled.
If both addresses
BCD (Hz) contain FF(H), tone
detection is disabled.
Do not change the
-
setting.
20 ms Factory setting: 500 ms
20 ms Factory setting: 3000 ms
The data is coded in the
- same way as address
680533.
Remarks
D619