Ricoh D131 Service Manual page 980

9 Enable H.323/Enable SIP SW is set to on?
10 IP address of local fax registered?
11 Alias number of local fax registered?
12 Remote fax registered in Gatekeeper?
13 Remote fax a T.38 terminal?
14 Remote fax switched off or busy?
15 Network bandwidth too narrow?
16 Remote fax cancelled transmission?
D619
Check the settings.
See User Parameter SW 34 Bit 0/SW
34 Bit 1
Register the IP address of the local fax.
Register the Alias number of the local
fax.
Contact the network administrator.
Check whether the remote fax is a T38
terminal.
Contact the network administrator.
Request the system administrator to
increase the bandwidth.
Raise the delay level.
IPFAX SW 01 Bit 0 to 3
Lower the modem transmission baud
rate.
IPFAX SW 05
Check whether the remote fax
cancelled the transmission.
88 SM