Reattaching The White Cover - Ricoh D131 Service Manual

ADF
6. Slowly loosen the rear lock screw [E] until you see the tip of the shaft
, then tighten the screw.
7. Re-install the Teflon sleeve.
8. Re-install the front and rear plastic cover.
9. Reinstall the transport belt assembly in the ADF.

Reattaching the White Cover

1. With its white side down, set the cover [A] on the exposure glass.
2. Make sure the upper left corner is aligned with the arrow at the corner of the exposure glass.
3. Close the ADF [B] on top of the cover.
D131/D132/D133 4-154
aligned with the hole
SM