Transfer Belt Removal - Ricoh D131 Service Manual

4.8.2 TRANSFER BELT REMOVAL

Remove:

Transfer belt unit
1. Disconnect the earth terminal [A] and transfer current terminal [B] (
hold the transfer belt unit [C] by its knobs [D].
2. Raise and stand the belt perpendicular to the unit and remove it.

To avoid scratching the belt on the guide, never rotate the belt unit farther than 90
degrees.
3. Release the drive roller [E] (
4. Press in on the drive roller to collapse the unit into a "U" shape [F].
5. Remove the belt and replace it.
SM
p.4-64
x 2).
4-65
Transfer Belt Unit
x 2). While doing this,
D131/D132/D133