Toner End Sensor - Ricoh D131 Service Manual

4.7.5 TONER END SENSOR

1. Development unit
2. Toner end sensor cover [A] ( x1)
3. Toner hopper [A] (
4. Toner end sensor [B] (

Remove the screws carefully to avoid stripping the holes.

Before installing a new toner end sensor, clean the toner end sensor port [C].
Reinstallation
1. When you re-attach the toner end sensor cover, make sure that the toner end sensor harness
is not pinched between the cover and the unit.
SM
p.4-34
x 2)
x 2)
4-61
Development Unit
D131/D132/D133